Bullet Bqats Did Not Use Enough Resin At All When Building This Boat Its A Biskit

[shane12966]

:?: :?: Have You Heard Of Any One Going Through The Hull Of Any Boat In There Seatand Live To Tell What Happened

[the1much]

through the deck AND the hull?

[PAR]

I fell from a mast I was repairing and went through the gunnels and bottom of a dinghy another guy was using to paint the boot with. I mean clean through, actually getting stuck in the mud bottom and two guys jumped in, to pull me out. I spent 3 weeks in the hospital 6 days of which I had no feeling from my chest down. So, yep, I'm suggesting you can survive, depending on where the crown jewels were dangling, when you made contact, etc. I still have dents in my head where they had the traction pins.

[the1much]

dents,,ya,,,sure,,,,, just like my kids saying,," dad, your staples are talking to ya",,hehe ,,i fell off a dock 1 time and went bout 5' into the mud,,,,took the guys forever to get me out,,,,mostly cause they were laughing so damned hard,,haha :D

[shane12966]

the seat was mounted straight onto the hull the water pressure at 40 mph on the foot rest that i had push out the side of the boat ripped the bottom of the hull where the seat was mounted like a can opener and the boat stopped dead and went straight down like a subumarine all took about 3 s
the guy sitting behind me was about 5 metres away up right treading water and the driver was no where to be seen then i saw about 3 metres down below me a his blue jumper so i went down and pulled him up was not breathing and he was full of water like a ballon so then the back seat of the boat was floating next to me so i put one arm on th seat and put my other arm around is tummy and pulled in with every thing i had water poored out of his mouth and he started to breath again